Guide – How to Measure

Measuring your blinds is now as simple as 1, 2, 3!

Things you will need:

Metal measuring tape
Pencil or pen
Order Sheet (click here to download & print)
Optional: Another person to hold tape at one end, especially for large windows

Things to consider:

Option 1: Face Mount

This is were the blind is fitted to the outside window frame or architrave.The face mounted option is commonly used when a window has little or no internal space in the recess to install the blind. another reason for this type of installation is were maximum block-out , privacy and light control is required.

Option 2: Recess Mount

This is were the blind is fitted to the inside internal recess of the window. The recess mounted option is commonly used when a clean flush look is required. Some things to consider is the gaping on each side of the blind and the depth of the recess.

60mm is comfortable to enable the blind to sit neatly within the recess….also be aware of handles, locks and other things that may cut down the clear space you have available to you inside the recess.

Another consideration is weather the blinds should be front rolled or normal rolled.

Option 1: Front Roll

This style of blind is commonly used if your preference is to hide the roll at the top of the window. The fabric comes off the front of the tube so the tube is hidden behind the fabric. In a RECESS application, it allows a little extra clearance for window handles, locks etc. Also note, when mounting a front rolled blind onto the face of the window, it will create a much larger gap as the fabric will not be as close to the wall as the normal rolled style of blind.

Option 2: Normal Roll

This is the most popular style and the one most commonly used.
The fabric hangs off the back of the roller tube, it keeps the fabric as close to the window in recess mount and it also keeps the fabric as close as possible to the wall when face mounted. This achieves the best heat and light control. If your fabric comes off the back of the tube, the blind could be impeded by window handles, locks etc. Either mount your blind further forward or order a front rolled style of blind.

Lets start measuring!

Note: Always measure the width 1st and then the drop, and always use millimeters.

Face Mounted

Width 1st : Hook your metal measuring tape on to the outside edge of the architrave as high as you can and pull firmly to archive an accurate measurement. Note this measurement on to the order sheet.

Drop 2nd: Hook your metal measuring tape on to the top of your architrave and pull firmly to achieve an accurate measurement.

Note: this measurement and chain control side you prefer on to the order sheet.e

Recess Mounted

Width 1st : Note this measurement on to the order sheet.

Drop 2nd:

Note: this measurement and chain control side you prefer on to the order sheet.e

Now that’s done and you still have some queries or concerns just contact us……. we are just a phone call or email away…so if your not sure our friendly experienced staff would be only to happy to help you though this procedure. Once you have measured all your windows and completed the order sheet you are now ready to order your blinds….its that simple…ciao for now.